代码一
ubuntu与centos
复制代码 代码如下:
ubuntu:
#!/bin/bash
echo "ipaddr:"
read line
echo $line
sed "s/address.*$/address=${line}/g" /etc/network/interfaces
centos(未测试):
#!/bin/bash
echo "ipaddr:"
read line
echo $line
sed "s/IPADDR.*$/IPADDR=${line}/g" /etc/sysconfig/network-scipts/ifcfg-eth0
代码二
ubuntu更改IP的shell代码，自己写的，比较拙，请指正
复制代码 代码如下:
#! /bin/sh
echo "Use gateway at 192.168.0.1 (Y) or 192.168.1.1 (N)
or detail set (O)\nPlease choose Y/N/O"
read OP
if [ "$OP" = Y ] || [ "$OP" = y ] ; then
GATEWAY=192.168.0.1
IP=192.168.0.215
elif [ "$OP" = N ] || [ "$OP" = n ] ; then
GATEWAY=192.168.1.1
IP=192.168.1.215
else
echo "Please input the ip:"
read IP
echo "Please input the gateway"
read GATEWAY
fi
echo "auto lo
iface lo inet static
auto eth0
iface eth0 inet static
netmask 255.255.255.0
address $IP
gateway $GATEWAY" > /tmp/interfaces
clear
echo "Init File interfaces Successfully!"
echo "*************************************"
cat /tmp/interfaces
echo "*************************************"
echo "Change the file in /etc/networks/interfaces?(Y/N)"
read OP
if [ "$OP" = Y ] || [ "$OP" = y ] ; then
echo "Set OK!"
cp /tmp/interfaces /etc/network/interfaces
/etc/init.d/networking restart
else
echo "Give up"
fi
rm /tmp/interfaces
echo "Whether change the DNS(/etc/resolv.conf)(Y/N)"
read OP
if [ "$OP" = Y ] || [ "$OP" = y ];then
echo "Input the DNS server IP:"
read IP
echo "Now change the DNS IP"
mv /etc/resolv.conf /etc/resolv.conf.bak
echo "nameserver $IP" >/etc/resolv.conf
echo "Done!"
fi
更换ip
RTX 5090要首发 性能要翻倍！三星展示GDDR7显存
三星在GTC上展示了专为下一代游戏GPU设计的GDDR7内存。
首次推出的GDDR7内存模块密度为16GB，每个模块容量为2GB。其速度预设为32 Gbps（PAM3），但也可以降至28 Gbps，以提高产量和初始阶段的整体性能和成本效益。
据三星表示，GDDR7内存的能效将提高20%，同时工作电压仅为1.1V，低于标准的1.2V。通过采用更新的封装材料和优化的电路设计，使得在高速运行时的发热量降低，GDDR7的热阻比GDDR6降低了70%。